ALASKA PRO · SENSEI PRO
SAC-09SKWA/I
The SAC-09SKWA/I is an uncompromising workhorse in the premium heat-pump segment. We recommend it for rooms up to 25 m² with increased demands on equipment durability. It is built for uninterrupted, intensive 24/7 operation in both cooling and heating at temperatures down to -30°C.
MODELS
Reliable heating even in severe frost
The ALASKA PRO series is equipped with reinforced heating of the outdoor unit's drain pan and crankcase, as well as an intelligent heat-exchanger defrosting system based on pressure and temperature sensors. This eliminates fan icing in harsh frosts.
An important fact: it is the higher-capacity models of this series (18 and 24 BTU) that we supply for infrastructure sites, logistics hubs, and regional branches of our major clients. Where equipment works under constant load and cannot afford to fail, Alaska Pro demonstrates an almost zero defect rate.
Inverter compressor and R32 refrigerant
The system uses a highly reliable industrial-grade compressor optimized to run on R32 freon.
Maximum protection against voltage surges in the grid;
Stable heat output even during a critical drop in outdoor temperature;
Seasonal energy-efficiency class A+++.
What our installation experience shows
Because of its powerful compressor, the outdoor unit is quite heavy. When installing it on insulated building facades, we use special extended studs and reinforced brackets to avoid deforming the thermal insulation.
Comparison with other SENSEI series
ALASKA PRO is aimed at maximum component reliability and operation in tough conditions. If a refined design and minimal dimensions for an apartment are more important to you, take a look at Luna Inverter PRO.
Which model in the series to choose?
Room area | Recommended model |
Up to 25 m² | SAC-09SKWA/I |
25–35 m² | SAC-12SKWA/I |
35–50 m² | SAC-18SKWA/I |
Up to 75 m² | SAC-24SKWA/I |
Who it suits
✅ For sites with increased fault-tolerance requirements (offices, server rooms, country houses).
✅ For the B2B segment and commercial premises that need prolonged heating in winter.
✅ For users looking for durable climate equipment with the maximum compressor lifespan.
Who it may not suit
❌ If the budget is limited and the air conditioner will only be switched on occasionally in summer, Alaska Pro's technological potential will go unused — it is better to choose the Victory series.
PACKAGE CONTENTS
- Indoor unit
- Outdoor unit
- Remote control
- Installation manual
- Warranty card
Got an error? Check its meaning here.
Wi-Fi module
This function lets you control the system over the Internet. You can adjust the temperature and other settings remotely.
Energy efficiency
Elegant Inverter wall-mounted split systems are rated energy class A (cooling A++ / heating A+++). The units are economical. Inverter technology has refined air conditioner operation and reduced energy consumption. In heating mode the system consumes just 0.745 kW.
Filtration
The Golden Fin antibacterial coating destroys pathogenic microorganisms and has sterilizing properties.
Heating mode
Thanks to the compressor and DC motors, the system delivers excellent performance in Heating mode during winter. The intelligent defrosting program together with intelligent anti-icing protection (Intelligent Preheating) allows the air conditioner to operate at outdoor temperatures down to -25°C.
DC Inverter
The high-performance DC Inverter maximizes the service life of your climate equipment and improves energy efficiency. This technology reduces noise and vibration, shortens the time needed to reach set parameters, and minimizes load on the power grid.
Plasma purification technology
The generator produces active hydrogen and oxygen ions that bind to viruses, bacteria, and dust. These substances are removed from the room along with the condensate. This technology improves air quality. Cold plasma cleans the airflow of harmful substances and saturates it with active ions.
3-D airflow distribution
Automatic swing of the indoor unit louvers creates a natural breeze effect. The flaps direct airflow in different directions, maintaining an even temperature throughout the room.
Noise level
The improved indoor unit design reduces noise levels to just 20 dB. The air conditioner's operation is unnoticeable — yet the results are not.
Auto defrost
To prevent the outdoor unit from icing over and ultimately failing, the auto-defrost system switches on automatically (for 5-10 minutes the air conditioner runs in cooling mode without the indoor unit fan, warming the outdoor unit's heat exchanger and thawing it).
KEY SPECIFICATIONS
- Cooling (kW)
- 2.6
- Heating (kW)
- 2.8
- Recommended Area (m²)
- 25
- Refrigerant Type
- R32
- Design
- split system
- Indoor Unit
- wall-mounted
- Compressor Type
- inverter, rotary Panasonic
- Main Modes
- heating, cooling, recirculation, dehumidification
- Remote Control
- Remote control
- Power Supply
- 220-240 V ~/50 Hz to the outdoor unit
- Indoor Unit Color
- white
- Additional Functions
- 24-hour timer Self-diagnostics TURBO mode Auto restart 3-speed and automatic outdoor unit fan control (DC motor) Vertical Auto Swing Super Quiet mode (19 dB) Maintenance heating 8 ° C 5-step and automatic indoor unit fan speed control (DC motor) Built-in WIFI module "Plasma generator ion" system Intelligent air conditioner frost protection (Intelligent Preheating) Intelligent Defrosting ECO mode HEALTH mode Start at low system voltage Filter clogging notification Winter kit
- LCD Display
- +
- Wi-Fi
- +
PERFORMANCE
- Power Consumption Cooling/Heating (kW)
- 0,75/0,75
- Air Flow (m³/h)
- 520
- EER Energy Efficiency
- 6.7/3.47
- COP Energy Efficiency
- 4,0/3,76
SOUND AND CONVENIENCE
- Indoor Unit Noise Level (dB)
- 38/34/21/19
- Outdoor Unit Noise Level (dB)
- 52
INSTALLATION AND PIPING
- Pipe Diameter (mm)
- Ø6.35/Ø9.53 (1/4" 3/8")
- Maximum Height Difference (m)
- 10
- Maximum Line Length (m)
- 20
- Operating Temperatures (card)
- -25 ~ +24 /-15 ~ +53
INDOOR UNIT DIMENSIONS AND WEIGHT
- Height (cm)
- 28.3
- Width (cm)
- 82.1
- Depth (cm)
- 20
- Indoor Unit Weight (kg)
- 9,5
- Indoor Unit Dimensions (W×D×H)
- 89.8×35.3×29.1 cm
OUTDOOR UNIT DIMENSIONS AND WEIGHT
- Outdoor Unit Weight (kg)
- 27,0
- Outdoor Unit Dimensions (W×D×H)
- 87.9×36.6×60.5 cm
- Outdoor Unit Mounting Bolt Spacing
- 540 mm
OTHER SERIES
View All
LUX EXTREME SERIES
CLASSIC INVERTER SERIES